Product image from the manufacturer or its official distributor, reproduced to identify the model (legal notice).
Ender 3 V3
The Creality Ender 3 V3 is a FDM 3D printer released in 2024 by Creality, with a build volume of 220×220×250 mm and MSRP of €399. Maximum speed 600 mm/s. Current status: active.
Manufacturer's suggested retail price (MSRP). Not the store price — the actual price may vary.
👁 7 views · 0 this month · 0 this week
Technical specifications
| Technology | FDM |
|---|---|
| Build volume | 220×220×250 mm |
| Weight | 7.83 kg |
| Max speed | 600 mm/s |
| Max acceleration | 20,000 mm/s² |
| Max nozzle temp | 300 °C |
| Nozzle material | hardened steel |
| Drive | direct |
| Flow rate | 32 mm³/s |
| Max bed temp | 110 °C |
| Bed material | PEI plate |
| Auto-leveling | auto mesh + strain gauge |
| Enclosed | No |
| Heated chamber | No |
| AMS compatible | No |
| WiFi | Yes |
| Camera included | No |
| Official slicer | Creality Print |
| OrcaSlicer support | Yes |
| Power | 350 W |
| Noise | — |
What materials can the Ender 3 V3 print?
This comes from four facts on its spec sheet: the nozzle reaches 300 °C, the bed 110 °C, and the machine is open-frame with a direct-drive extruder. Those four facts decide most of the list: nozzle temperature sets the ceiling on what you can melt, the bed decides whether the first layer sticks, the enclosure keeps large parts from warping, and the extruder type rules flexibles. We don't test the machine — this is guidance derived from verified data, not a guarantee.
In short: it prints PLA, PETG, TPU (flexible) without a fight, and it can reach ABS, ASA, Nylon (PA), Policarbonato (PC) with conditions — the detail for each is below.
- PLAYes
Yes. PLA has no special needs: any FDM printer like the Ender 3 V3 prints it out of the box.
- PETGYes
Yes. With a nozzle up to 300 °C and a bed up to 110 °C it comfortably meets PETG's needs.
- TPU (flexible)Yes
Yes. It has a direct-drive extruder, ideal for flexibles; prints TPU well (go slow).
- ABSWith caveats
With caveats. It reaches 300 °C, but it's open-frame: ABS can warp and ventilation is advised. Doable in a draft-free spot or by adding an enclosure.
- ASAWith caveats
With caveats. It reaches 300 °C, but it's open-frame: ASA can warp and ventilation is advised. Doable in a draft-free spot or by adding an enclosure.
- Nylon (PA)With caveats
With caveats. It reaches 300 °C but is open-frame; Nylon warps in drafts and absorbs moisture. Enclosure + drying almost mandatory. For carbon-fibre variants, use a hardened-steel nozzle.
- Policarbonato (PC)With caveats
With caveats. It has the temperature (300 °C) but is open-frame; PC warps badly without an enclosure. Only with one added. For carbon-fibre variants, use a hardened-steel nozzle.
| Material | Prints it? | Why |
|---|---|---|
| PLA | Yes | Yes. PLA has no special needs: any FDM printer like the Ender 3 V3 prints it out of the box. |
| PETG | Yes | Yes. With a nozzle up to 300 °C and a bed up to 110 °C it comfortably meets PETG's needs. |
| TPU (flexible) | Yes | Yes. It has a direct-drive extruder, ideal for flexibles; prints TPU well (go slow). |
| ABS | With caveats | With caveats. It reaches 300 °C, but it's open-frame: ABS can warp and ventilation is advised. Doable in a draft-free spot or by adding an enclosure. |
| ASA | With caveats | With caveats. It reaches 300 °C, but it's open-frame: ASA can warp and ventilation is advised. Doable in a draft-free spot or by adding an enclosure. |
| Nylon (PA) | With caveats | With caveats. It reaches 300 °C but is open-frame; Nylon warps in drafts and absorbs moisture. Enclosure + drying almost mandatory. For carbon-fibre variants, use a hardened-steel nozzle. |
| Policarbonato (PC) | With caveats | With caveats. It has the temperature (300 °C) but is open-frame; PC warps badly without an enclosure. Only with one added. For carbon-fibre variants, use a hardened-steel nozzle. |
Need the materials it struggles with? These printers handle them
Policarbonato (PC)
Popular comparisons
Community reviews
No reviews for this printer yet. Own it? Be the first. 👇
User opinions, moderated before publishing. hotend doesn't verify purchases.
Sources & references
Specs cross-checked against these public sources:
- Web oficial fabricanteManufacturer page
Specs checked against the sources cited above on 19/06/2026. Confidence in the data: medium.