Elegoo Centauri Carbon vs Sovol SV06 Plus ACE
The Elegoo Centauri Carbon (2025, €349) and the Sovol SV06 Plus ACE (2025, €349) are two FDM 3D printers many people compare before buying.
On the technical side, only the Elegoo Centauri Carbon is enclosed (better for ABS and technical materials), and the Sovol SV06 Plus ACE offers more build volume (300×300×350 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Elegoo Centauri Carbon €349 | Sovol SV06 Plus ACE €349 | |
|---|---|---|
| Geometry | ||
| Build volume | 256³ mm | 300×300×350 mm 🏆 |
| Weight | 16 kg | — |
| Speed | ||
| Max speed | 500 mm/s | 500 mm/s |
| Max acceleration | 20,000 mm/s² 🏆 | 15,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 320 °C 🏆 | 300 °C |
| Nozzle material | hardened steel | — |
| Drive type | direct | direct |
| Flow rate | 32 mm³/s 🏆 | — |
| Bed | ||
| Max bed temp | 110 °C 🏆 | 100 °C |
| Bed material | PEI plate | PEI |
| Auto-leveling | auto mesh + strain gauge | Full-auto (nozzle strain gauge, adaptive probing) |
| Enclosed | Yes 🏆 | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | No | No |
| AMS type | — | — |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | Yes | — |
| Camera | Yes (720p) | Yes () |
| Calibration | ||
| Vibration compensation | Yes | — |
| Flow calibration | Yes | — |
| Input shaping | Yes | — |
| Pressure advance | Yes | — |
| Software | ||
| Official slicer | Elegoo Slicer (OrcaSlicer fork) | OrcaSlicer |
| OrcaSlicer | Yes | — |
| Noise | ||
| Noise | — | — |
| Power | 400 W 🏆 | 500 W |
Frequently asked
- Which has better value: Elegoo Centauri Carbon or Sovol SV06 Plus ACE?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Sovol SV06 Plus ACE with 300×300×350 mm.