Artillery M1 Pro vs Sovol SV06 Plus ACE
The Artillery M1 Pro (2025, €349) and the Sovol SV06 Plus ACE (2025, €349) are two FDM 3D printers many people compare before buying.
On the technical side, only the Artillery M1 Pro is enclosed (better for ABS and technical materials), and the Sovol SV06 Plus ACE offers more build volume (300×300×350 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Artillery M1 Pro €349 | Sovol SV06 Plus ACE €349 | |
|---|---|---|
| Geometry | ||
| Build volume | 260³ mm | 300×300×350 mm 🏆 |
| Weight | 14 kg | — |
| Speed | ||
| Max speed | 600 mm/s 🏆 | 500 mm/s |
| Max acceleration | 20,000 mm/s² 🏆 | 15,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 320 °C 🏆 | 300 °C |
| Nozzle material | hardened steel | — |
| Drive type | direct | direct |
| Flow rate | — | — |
| Bed | ||
| Max bed temp | 120 °C 🏆 | 100 °C |
| Bed material | PEI | PEI |
| Auto-leveling | auto | Full-auto (nozzle strain gauge, adaptive probing) |
| Enclosed | Yes 🏆 | No |
| Heated chamber | Yes 🏆 | No |
| Multimaterial | ||
| AMS compatible | No | No |
| AMS type | — | — |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | — | — |
| Camera | Yes () | Yes () |
| Calibration | ||
| Vibration compensation | — | — |
| Flow calibration | — | — |
| Input shaping | — | — |
| Pressure advance | — | — |
| Software | ||
| Official slicer | Orca Slicer / Artillery Slicer | OrcaSlicer |
| OrcaSlicer | — | — |
| Noise | ||
| Noise | — | — |
| Power | 1150 W | 500 W 🏆 |
Verdict
- If speed matters most, the Artillery M1 Pro wins (600 mm/s vs 500 mm/s).
Frequently asked
- Which has better value: Artillery M1 Pro or Sovol SV06 Plus ACE?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Sovol SV06 Plus ACE with 300×300×350 mm.