Artillery M1 Pro vs Elegoo Centauri Carbon
The Artillery M1 Pro (2025, €349) and the Elegoo Centauri Carbon (2025, €349) are two FDM 3D printers many people compare before buying.
On the technical side, the Artillery M1 Pro offers more build volume (260³ mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Artillery M1 Pro €349 | Elegoo Centauri Carbon €349 | |
|---|---|---|
| Geometry | ||
| Build volume | 260³ mm 🏆 | 256³ mm |
| Weight | 14 kg | 16 kg |
| Speed | ||
| Max speed | 600 mm/s 🏆 | 500 mm/s |
| Max acceleration | 20,000 mm/s² | 20,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 320 °C | 320 °C |
| Nozzle material | hardened steel | hardened steel |
| Drive type | direct | direct |
| Flow rate | — | 32 mm³/s 🏆 |
| Bed | ||
| Max bed temp | 120 °C 🏆 | 110 °C |
| Bed material | PEI | PEI plate |
| Auto-leveling | auto | auto mesh + strain gauge |
| Enclosed | Yes | Yes |
| Heated chamber | Yes 🏆 | No |
| Multimaterial | ||
| AMS compatible | No | No |
| AMS type | — | — |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | — | Yes |
| Camera | Yes () | Yes (720p) |
| Calibration | ||
| Vibration compensation | — | Yes |
| Flow calibration | — | Yes |
| Input shaping | — | Yes |
| Pressure advance | — | Yes |
| Software | ||
| Official slicer | Orca Slicer / Artillery Slicer | Elegoo Slicer (OrcaSlicer fork) |
| OrcaSlicer | — | Yes |
| Noise | ||
| Noise | — | — |
| Power | 1150 W | 400 W 🏆 |
Verdict
- If speed matters most, the Artillery M1 Pro wins (600 mm/s vs 500 mm/s).
Frequently asked
- Which has better value: Artillery M1 Pro or Elegoo Centauri Carbon?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Artillery M1 Pro with 260³ mm.