Elegoo Centauri Carbon vs Creality K2
The Elegoo Centauri Carbon (2025, €349) and the Creality K2 (2025, €359) are two FDM 3D printers many people compare before buying.
On the technical side, only the Creality K2 supports multicolor (AMS), and the Creality K2 offers more build volume (260³ mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Elegoo Centauri Carbon €349 | Creality K2 €359 | |
|---|---|---|
| Geometry | ||
| Build volume | 256³ mm | 260³ mm 🏆 |
| Weight | 16 kg | 18.3 kg |
| Speed | ||
| Max speed | 500 mm/s | 600 mm/s 🏆 |
| Max acceleration | 20,000 mm/s² | 20,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 320 °C 🏆 | 300 °C |
| Nozzle material | hardened steel | Titanium heatbreak, copper body, hardened steel tip |
| Drive type | direct | direct |
| Flow rate | 32 mm³/s 🏆 | — |
| Bed | ||
| Max bed temp | 110 °C 🏆 | 100 °C |
| Bed material | PEI plate | PEI-coated flexible magnetic steel |
| Auto-leveling | auto mesh + strain gauge | Smart Auto Leveling (strain sensor) |
| Enclosed | Yes | Yes |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | No | Yes 🏆 |
| AMS type | — | CFS |
| AMS slots | — | 4 🏆 |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | Yes | — |
| Camera | Yes (720p) | Yes () |
| Calibration | ||
| Vibration compensation | Yes | — |
| Flow calibration | Yes | — |
| Input shaping | Yes | — |
| Pressure advance | Yes | — |
| Software | ||
| Official slicer | Elegoo Slicer (OrcaSlicer fork) | Creality Print |
| OrcaSlicer | Yes | — |
| Noise | ||
| Noise | — | — |
| Power | 400 W 🏆 | — |
Verdict
- If speed matters most, the Creality K2 wins.
- On price, Elegoo Centauri Carbon is cheaper.
Frequently asked
- Which has better value: Elegoo Centauri Carbon or Creality K2?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Creality K2 with 260³ mm.