UltiMaker
MakerBot Sketch Sprint
The UltiMaker MakerBot Sketch Sprint is a FDM 3D printer released in 2024 by UltiMaker, with a build volume of 220³ mm and MSRP of €1,849. Enclosed chamber. Maximum speed 300 mm/s. Current status: active.
€1,849 Manufacturer's MSRP
Manufacturer's suggested retail price (MSRP). Not the Amazon price — the actual price in stores may vary.
Technical specifications
| Technology | FDM |
|---|---|
| Build volume | 220³ mm |
| Weight | 22.26 kg |
| Max speed | 300 mm/s |
| Max acceleration | — |
| Max nozzle temp | 280 °C |
| Nozzle material | — |
| Drive | direct |
| Flow rate | — |
| Max bed temp | 110 °C |
| Bed material | Flexible steel with PEI surface |
| Auto-leveling | 25-point automatic mesh leveling |
| Enclosed | Yes |
| Heated chamber | No |
| AMS compatible | No |
| WiFi | Yes |
| Camera included | Yes () |
| Official slicer | UltiMaker Cura / Digital Factory |
| OrcaSlicer support | — |
| Power | — |
| Noise | 51 dB |
What materials can it print?
Compatibility derived from its verified specs. See the full materials guide →
| Material | Prints it? | Why |
|---|---|---|
| PLA | Yes | Yes. PLA has no special needs: any FDM printer like the MakerBot Sketch Sprint prints it out of the box. |
| PETG | Yes | Yes. With a nozzle up to 280 °C and a bed up to 110 °C it comfortably meets PETG's needs. |
| TPU (flexible) | Yes | Yes. It has a direct-drive extruder, ideal for flexibles; prints TPU well (go slow). |
| ABS | Yes | Yes. Nozzle up to 280 °C and an enclosure: it contains ABS's warping and fumes. |
| ASA | Yes | Yes. Nozzle up to 280 °C and an enclosure: it contains ASA's warping and fumes. |
| Nylon (PA) | Yes | Yes. It reaches 280 °C and is enclosed: it prints Nylon (dry it well first). For carbon-fibre variants, use a hardened-steel nozzle. |
| Policarbonato (PC) | Yes | Yes. Nozzle up to 280 °C and an enclosure: suitable for PC. For carbon-fibre variants, use a hardened-steel nozzle. |
Popular comparisons
Sources & references
Specs cross-checked against these public sources: