Product image from the manufacturer or its official distributor, reproduced to identify the model (legal notice).
Hi Combo
The Creality Hi Combo is a FDM 3D printer released in 2025 by Creality, with a build volume of 260×260×300 mm and MSRP of €599. Compatible with CFS (4 slots). Claimed maximum speed: 500 mm/s.
Manufacturer's suggested retail price (MSRP). Not the store price — the actual price may vary.
Technical specifications
| Technology | FDM |
|---|---|
| Build volume | 260×260×300 mm |
| Weight | 11.5 kg |
| Max speed | 500 mm/s |
| Max acceleration | 12,000 mm/s² |
| Max nozzle temp | 300 °C |
| Nozzle material | hardened steel |
| Drive | direct |
| Flow rate | 32 mm³/s |
| Max bed temp | 100 °C |
| Bed material | PC spring steel |
| Auto-leveling | auto mesh + strain gauge |
| Enclosed | No |
| Heated chamber | No |
| AMS compatible | Yes (CFS (4 slots)) |
| WiFi | Yes |
| Camera included | No |
| Official slicer | Creality Print |
| OrcaSlicer support | Yes |
| Power | 350 W |
| Noise | 48 dB |
What materials can the Hi Combo print?
This comes from four facts on its spec sheet: the nozzle reaches 300 °C, the bed 100 °C, and the machine is open-frame with a direct-drive extruder. Those four facts decide most of the list: nozzle temperature sets the ceiling on what you can melt, the bed decides whether the first layer sticks, the enclosure keeps large parts from warping, and the extruder type rules flexibles. We don't test the machine — this is guidance derived from verified data, not a guarantee.
In short: it prints PLA, PETG, TPU (flexible) without a fight, and it can reach ABS, ASA, Nylon (PA), Policarbonato (PC) with conditions — the detail for each is below.
| Material | Prints it? | Why |
|---|---|---|
| PLA | Yes | Yes. PLA has no special needs: any FDM printer like the Hi Combo prints it out of the box. |
| PETG | Yes | Yes. With a nozzle up to 300 °C and a bed up to 100 °C it comfortably meets PETG's needs. |
| TPU (flexible) | Yes | Yes. It has a direct-drive extruder, ideal for flexibles; prints TPU well (go slow). |
| ABS | With caveats | With caveats. It reaches 300 °C, but it's open-frame: ABS can warp and ventilation is advised. Doable in a draft-free spot or by adding an enclosure. |
| ASA | With caveats | With caveats. It reaches 300 °C, but it's open-frame: ASA can warp and ventilation is advised. Doable in a draft-free spot or by adding an enclosure. |
| Nylon (PA) | With caveats | With caveats. It reaches 300 °C but is open-frame; Nylon warps in drafts and absorbs moisture. Enclosure + drying almost mandatory. For carbon-fibre variants, use a hardened-steel nozzle. |
| Policarbonato (PC) | With caveats | With caveats. It has the temperature (300 °C) but is open-frame; PC warps badly without an enclosure. Only with one added. For carbon-fibre variants, use a hardened-steel nozzle. |
Need the materials it struggles with? These printers handle them
ABS, ASA, Nylon (PA), Policarbonato (PC)
Popular comparisons
Own the Hi Combo? Write a review
User opinions, moderated before publishing. hotend doesn't verify purchases.
Sources & references
Specs cross-checked against these public sources:
- Web oficial fabricanteManufacturer page
Specs taken from the sources cited above; we have no recorded date for the last check. Confidence in the data: medium.