Sovol SV06 ACE vs Sovol SV06 Plus ACE
The Sovol SV06 ACE (2024, €299) and the Sovol SV06 Plus ACE (2025, €349) are two FDM 3D printers many people compare before buying.
The Sovol SV06 ACE is the more affordable of the two, with a gap of about 50 (~14%) versus the other.
On the technical side, the Sovol SV06 Plus ACE offers more build volume (300×300×350 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Sovol SV06 ACE €299 | Sovol SV06 Plus ACE €349 | |
|---|---|---|
| Geometry | ||
| Build volume | 220×220×250 mm | 300×300×350 mm 🏆 |
| Weight | — | — |
| Speed | ||
| Max speed | 600 mm/s 🏆 | 500 mm/s |
| Max acceleration | 20,000 mm/s² 🏆 | 15,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 300 °C | 300 °C |
| Nozzle material | brass | — |
| Drive type | direct | direct |
| Flow rate | — | — |
| Bed | ||
| Max bed temp | 100 °C | 100 °C |
| Bed material | PEI | PEI |
| Auto-leveling | automatic (pressure sensor) | Full-auto (nozzle strain gauge, adaptive probing) |
| Enclosed | No | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | No | No |
| AMS type | — | — |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | — | — |
| Camera | Yes () | Yes () |
| Calibration | ||
| Measures its own vibrations (built-in sensor) | Yes | Yes |
| Calibrates flow by itself (sensor) | — | — |
| Input shaping | Yes | Yes |
| Pressure advance | Yes | Yes |
| Software | ||
| Official slicer | OrcaSlicer | OrcaSlicer |
| OrcaSlicer | — | — |
| Noise | ||
| Noise | — | — |
| Power | 360 W 🏆 | 500 W |
Verdict
- If speed matters most, the Sovol SV06 ACE wins (600 mm/s vs 500 mm/s).
- On price, Sovol SV06 ACE is cheaper.
Frequently asked
- Which has better value: Sovol SV06 ACE or Sovol SV06 Plus ACE?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Sovol SV06 Plus ACE with 300×300×350 mm.