Bambu Lab A1 vs Creality SPARKX i7
The Bambu Lab A1 (2023, €399) and the Creality SPARKX i7 (2026, €403) are two FDM 3D printers many people compare before buying.
On the technical side, the Creality SPARKX i7 offers more build volume (260×260×255 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Bambu Lab A1 €399 | Creality SPARKX i7 €403 | |
|---|---|---|
| Geometry | ||
| Build volume | 256³ mm | 260×260×255 mm 🏆 |
| Weight | 8.3 kg | 9.12 kg |
| Speed | ||
| Max speed | 500 mm/s | 500 mm/s |
| Max acceleration | 10,000 mm/s² | 10,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 300 °C | 300 °C |
| Nozzle material | stainless steel | — |
| Drive type | direct | direct |
| Flow rate | 28 mm³/s 🏆 | — |
| Bed | ||
| Max bed temp | 100 °C | 100 °C |
| Bed material | PEI plate | PEI |
| Auto-leveling | load cell + auto mesh | Full-auto leveling |
| Enclosed | No | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | Yes | Yes |
| AMS type | lite | CFS |
| AMS slots | 4 | 4 |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | No | — |
| Camera | Yes (1080p) | Yes () |
| Calibration | ||
| Vibration compensation | Yes | — |
| Flow calibration | Yes | — |
| Input shaping | Yes | — |
| Pressure advance | Yes | — |
| Software | ||
| Official slicer | Bambu Studio | Creality Print |
| OrcaSlicer | Yes | — |
| Noise | ||
| Noise | 48 dB 🏆 | — |
| Power | 1300 W | 700 W 🏆 |
Verdict
- On price, Bambu Lab A1 is cheaper.
Frequently asked
- Which has better value: Bambu Lab A1 or Creality SPARKX i7?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Creality SPARKX i7 with 260×260×255 mm.