Kobra S1 Max
The Anycubic Kobra S1 Max is a FDM 3D printer released in 2026 by Anycubic, with a build volume of 350³ mm and MSRP of €899. Compatible with multi-material system ACE Pro (4 slots). Enclosed chamber. Active heated chamber. Maximum speed 600 mm/s. Current status: active.
Manufacturer's suggested retail price (MSRP). Not the store price — the actual price may vary.
👁 4 views · 4 this month · 1 this week
Technical specifications
| Technology | FDM |
|---|---|
| Build volume | 350³ mm |
| Weight | 25.7 kg |
| Max speed | 600 mm/s |
| Max acceleration | 20,000 mm/s² |
| Max nozzle temp | 350 °C |
| Nozzle material | hardened steel |
| Drive | direct |
| Flow rate | — |
| Max bed temp | 120 °C |
| Bed material | PEI spring steel |
| Auto-leveling | LeviQ 3.0 (automatica) |
| Enclosed | Yes |
| Heated chamber | Yes |
| AMS compatible | Yes (ACE Pro, 4 slots) |
| WiFi | Yes |
| Camera included | Yes (720p) |
| Official slicer | Anycubic Slicer Next |
| OrcaSlicer support | — |
| Power | 2200 W |
| Noise | 48 dB |
What materials can the Kobra S1 Max print?
This comes from four facts on its spec sheet: the nozzle reaches 350 °C, the bed 120 °C, and the machine is enclosed with a direct-drive extruder. Those four facts decide most of the list: nozzle temperature sets the ceiling on what you can melt, the bed decides whether the first layer sticks, the enclosure keeps large parts from warping, and the extruder type rules flexibles. We don't test the machine — this is guidance derived from verified data, not a guarantee.
In short: it prints PLA, PETG, TPU (flexible), ABS, ASA, Nylon (PA), Policarbonato (PC) without a fight.
- PLAYes
Yes. PLA has no special needs: any FDM printer like the Kobra S1 Max prints it out of the box.
- PETGYes
Yes. With a nozzle up to 350 °C and a bed up to 120 °C it comfortably meets PETG's needs.
- TPU (flexible)Yes
Yes. It has a direct-drive extruder, ideal for flexibles; prints TPU well (go slow).
- ABSYes
Yes. Nozzle up to 350 °C and an enclosure: it contains ABS's warping and fumes.
- ASAYes
Yes. Nozzle up to 350 °C and an enclosure: it contains ASA's warping and fumes.
- Nylon (PA)Yes
Yes. It reaches 350 °C and is enclosed: it prints Nylon (dry it well first). For carbon-fibre variants, use a hardened-steel nozzle.
- Policarbonato (PC)Yes
Yes. Nozzle up to 350 °C and an enclosure with active heating: suitable for PC. For carbon-fibre variants, use a hardened-steel nozzle.
| Material | Prints it? | Why |
|---|---|---|
| PLA | Yes | Yes. PLA has no special needs: any FDM printer like the Kobra S1 Max prints it out of the box. |
| PETG | Yes | Yes. With a nozzle up to 350 °C and a bed up to 120 °C it comfortably meets PETG's needs. |
| TPU (flexible) | Yes | Yes. It has a direct-drive extruder, ideal for flexibles; prints TPU well (go slow). |
| ABS | Yes | Yes. Nozzle up to 350 °C and an enclosure: it contains ABS's warping and fumes. |
| ASA | Yes | Yes. Nozzle up to 350 °C and an enclosure: it contains ASA's warping and fumes. |
| Nylon (PA) | Yes | Yes. It reaches 350 °C and is enclosed: it prints Nylon (dry it well first). For carbon-fibre variants, use a hardened-steel nozzle. |
| Policarbonato (PC) | Yes | Yes. Nozzle up to 350 °C and an enclosure with active heating: suitable for PC. For carbon-fibre variants, use a hardened-steel nozzle. |
Community reviews
No reviews for this printer yet. Own it? Be the first. 👇
User opinions, moderated before publishing. hotend doesn't verify purchases.
Sources & references
Specs cross-checked against these public sources:
- Notebookcheck - anuncio Kobra S1 Max Combo (dimensiones, 720p, temperaturas)News articleretrieved7/2/2026
- 3DJake - ficha Kobra S1 Max (peso, velocidad, aceleracion, LeviQ 3.0, PEI)Independent reviewretrieved7/2/2026
Specs checked against the sources cited above on 02/07/2026. Confidence in the data: medium.