Sovol SV06 Plus ACE vs Anycubic Kobra 2 Pro
The Sovol SV06 Plus ACE (2025, €349) and the Anycubic Kobra 2 Pro (2023, €369) are two FDM 3D printers many people compare before buying.
On the technical side, the Sovol SV06 Plus ACE offers more build volume (300×300×350 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Sovol SV06 Plus ACE €349 | Anycubic Kobra 2 Pro €369 | |
|---|---|---|
| Geometry | ||
| Build volume | 300×300×350 mm 🏆 | 220×220×250 mm |
| Weight | — | 8.5 kg |
| Speed | ||
| Max speed | 500 mm/s | 500 mm/s |
| Max acceleration | 15,000 mm/s² | 20,000 mm/s² 🏆 |
| Hot-end | ||
| Max nozzle temp | 300 °C 🏆 | 260 °C |
| Nozzle material | — | brass |
| Drive type | direct | direct |
| Flow rate | — | 25 mm³/s 🏆 |
| Bed | ||
| Max bed temp | 100 °C | 110 °C 🏆 |
| Bed material | PEI | PEI plate |
| Auto-leveling | Full-auto (nozzle strain gauge, adaptive probing) | LeviQ 2.0 |
| Enclosed | No | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | No | No |
| AMS type | — | — |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | — | No |
| Camera | Yes () | — |
| Calibration | ||
| Vibration compensation | — | Yes |
| Flow calibration | — | No |
| Input shaping | — | Yes |
| Pressure advance | — | Yes |
| Software | ||
| Official slicer | OrcaSlicer | Anycubic Slicer Next |
| OrcaSlicer | — | Yes |
| Noise | ||
| Noise | — | — |
| Power | 500 W | 350 W 🏆 |
Verdict
- On price, Sovol SV06 Plus ACE is cheaper.
Frequently asked
- Which has better value: Sovol SV06 Plus ACE or Anycubic Kobra 2 Pro?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Sovol SV06 Plus ACE with 300×300×350 mm.