QIDI Tech Plus4 vs Flashforge Creator 5 Pro
The QIDI Tech Plus4 (2024, €799) and the Flashforge Creator 5 Pro (2025, €929) are two FDM 3D printers many people compare before buying.
The QIDI Tech Plus4 is the more affordable of the two, with a gap of about 130 (~14%) versus the other.
On the technical side, only the Flashforge Creator 5 Pro supports multicolor (AMS), and the QIDI Tech Plus4 offers more build volume (305×305×280 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| QIDI Tech Plus4 €799 | Flashforge Creator 5 Pro €929 | |
|---|---|---|
| Geometry | ||
| Build volume | 305×305×280 mm 🏆 | 256³ mm |
| Weight | 16 kg | 18 kg |
| Speed | ||
| Max speed | 600 mm/s | 600 mm/s |
| Max acceleration | 20,000 mm/s² | 30,000 mm/s² 🏆 |
| Hot-end | ||
| Max nozzle temp | 370 °C 🏆 | 320 °C |
| Nozzle material | hardened steel | hardened steel |
| Drive type | direct | direct |
| Flow rate | 50 mm³/s 🏆 | — |
| Bed | ||
| Max bed temp | 120 °C | 120 °C |
| Bed material | PEI plate | PEI |
| Auto-leveling | auto mesh + strain gauge | automatic |
| Enclosed | Yes | Yes |
| Heated chamber | Yes | Yes |
| Multimaterial | ||
| AMS compatible | No | Yes 🏆 |
| AMS type | — | toolchanger |
| AMS slots | — | 4 🏆 |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | Yes | — |
| Camera | Yes (1080p) | Yes () |
| Calibration | ||
| Vibration compensation | Yes | — |
| Flow calibration | Yes | — |
| Input shaping | Yes | — |
| Pressure advance | Yes | — |
| Software | ||
| Official slicer | Qidi Studio (OrcaSlicer fork) | Orca-Flashforge / OrcaSlicer |
| OrcaSlicer | Yes | — |
| Noise | ||
| Noise | — | 55 dB 🏆 |
| Power | 1000 W 🏆 | 1200 W |
Verdict
- On price, QIDI Tech Plus4 is cheaper.
Frequently asked
- Which has better value: QIDI Tech Plus4 or Flashforge Creator 5 Pro?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- QIDI Tech Plus4 with 305×305×280 mm.