Flashforge Creator 5 Pro vs Creality K1 Max
The Flashforge Creator 5 Pro (2025, €929) and the Creality K1 Max (2023, €999) are two FDM 3D printers many people compare before buying.
On the technical side, only the Flashforge Creator 5 Pro supports multicolor (AMS), and the Creality K1 Max offers more build volume (300³ mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Flashforge Creator 5 Pro €929 | Creality K1 Max €999 | |
|---|---|---|
| Geometry | ||
| Build volume | 256³ mm | 300³ mm 🏆 |
| Weight | 18 kg | 18 kg |
| Speed | ||
| Max speed | 600 mm/s | 600 mm/s |
| Max acceleration | 30,000 mm/s² 🏆 | 20,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 320 °C 🏆 | 300 °C |
| Nozzle material | hardened steel | hardened steel |
| Drive type | direct | direct |
| Flow rate | — | 32 mm³/s 🏆 |
| Bed | ||
| Max bed temp | 120 °C | 120 °C |
| Bed material | PEI | PEI plate |
| Auto-leveling | automatic | LIDAR + strain gauge |
| Enclosed | Yes | Yes |
| Heated chamber | Yes 🏆 | No |
| Multimaterial | ||
| AMS compatible | Yes 🏆 | No |
| AMS type | toolchanger | — |
| AMS slots | 4 🏆 | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | — | Yes |
| Camera | Yes () | Yes (1080p) |
| Calibration | ||
| Vibration compensation | — | Yes |
| Flow calibration | — | Yes |
| Input shaping | — | Yes |
| Pressure advance | — | Yes |
| Software | ||
| Official slicer | Orca-Flashforge / OrcaSlicer | Creality Print |
| OrcaSlicer | — | Yes |
| Noise | ||
| Noise | 55 dB 🏆 | — |
| Power | 1200 W | 1000 W 🏆 |
Verdict
- On price, Flashforge Creator 5 Pro is cheaper.
Frequently asked
- Which has better value: Flashforge Creator 5 Pro or Creality K1 Max?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Creality K1 Max with 300³ mm.