QIDI Tech Plus4 vs Creality K2 Pro
The QIDI Tech Plus4 (2024, €799) and the Creality K2 Pro (2025, $849) are two FDM 3D printers many people compare before buying.
On the technical side, only the Creality K2 Pro supports multicolor (AMS), and the Creality K2 Pro offers more build volume (300³ mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| QIDI Tech Plus4 €799 | Creality K2 Pro $849 | |
|---|---|---|
| Geometry | ||
| Build volume | 305×305×280 mm 🏆 | 300³ mm |
| Weight | 16 kg | 23.7 kg |
| Speed | ||
| Max speed | 600 mm/s | 600 mm/s |
| Max acceleration | 20,000 mm/s² | 20,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 370 °C 🏆 | 300 °C |
| Nozzle material | hardened steel | hardened steel |
| Drive type | direct | direct |
| Flow rate | 50 mm³/s 🏆 | — |
| Bed | ||
| Max bed temp | 120 °C 🏆 | 110 °C |
| Bed material | PEI plate | PEI |
| Auto-leveling | auto mesh + strain gauge | full-auto |
| Enclosed | Yes | Yes |
| Heated chamber | Yes | Yes |
| Multimaterial | ||
| AMS compatible | No | Yes 🏆 |
| AMS type | — | CFS |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | Yes | — |
| Camera | Yes (1080p) | Yes () |
| Calibration | ||
| Vibration compensation | Yes | — |
| Flow calibration | Yes | — |
| Input shaping | Yes | — |
| Pressure advance | Yes | — |
| Software | ||
| Official slicer | Qidi Studio (OrcaSlicer fork) | Creality Print 6.0 |
| OrcaSlicer | Yes | — |
| Noise | ||
| Noise | — | — |
| Power | 1000 W 🏆 | 1300 W |
Verdict
- On price, QIDI Tech Plus4 is cheaper.
Frequently asked
- Which has better value: QIDI Tech Plus4 or Creality K2 Pro?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- QIDI Tech Plus4 with 305×305×280 mm.