Elegoo Neptune 4 Plus vs Elegoo Neptune 4
The Elegoo Neptune 4 Plus (2023, €239) and the Elegoo Neptune 4 (2023, €249) are two FDM 3D printers many people compare before buying.
On the technical side, the Elegoo Neptune 4 Plus offers more build volume (320×320×385 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Elegoo Neptune 4 Plus €239 | Elegoo Neptune 4 €249 | |
|---|---|---|
| Geometry | ||
| Build volume | 320×320×385 mm 🏆 | 225×225×265 mm |
| Weight | — | 8.3 kg |
| Speed | ||
| Max speed | 500 mm/s | 500 mm/s |
| Max acceleration | 12,000 mm/s² | 20,000 mm/s² 🏆 |
| Hot-end | ||
| Max nozzle temp | 300 °C | 300 °C |
| Nozzle material | — | — |
| Drive type | direct | direct |
| Flow rate | — | — |
| Bed | ||
| Max bed temp | 110 °C | 110 °C |
| Bed material | PEI | PEI |
| Auto-leveling | Auto 121-point (11x11) | 121-point automatic (inductive sensor) |
| Enclosed | No | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | No | No |
| AMS type | — | — |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | Yes | No |
| Ethernet | — | — |
| Camera | — | — |
| Calibration | ||
| Vibration compensation | — | — |
| Flow calibration | — | — |
| Input shaping | — | — |
| Pressure advance | — | — |
| Software | ||
| Official slicer | Cura | Cura (Elegoo edition) |
| OrcaSlicer | — | — |
| Noise | ||
| Noise | — | 50 dB 🏆 |
| Power | — | 310 W 🏆 |
Verdict
- On price, Elegoo Neptune 4 Plus is cheaper.
Frequently asked
- Which has better value: Elegoo Neptune 4 Plus or Elegoo Neptune 4?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Elegoo Neptune 4 Plus with 320×320×385 mm.