Elegoo Neptune 4 Plus vs Anycubic Kobra 2
The Elegoo Neptune 4 Plus (2023, €239) and the Anycubic Kobra 2 (2023, €279) are two FDM 3D printers many people compare before buying.
The Elegoo Neptune 4 Plus is the more affordable of the two, with a gap of about 40 (~14%) versus the other.
On the technical side, the Elegoo Neptune 4 Plus offers more build volume (320×320×385 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Elegoo Neptune 4 Plus €239 | Anycubic Kobra 2 €279 | |
|---|---|---|
| Geometry | ||
| Build volume | 320×320×385 mm 🏆 | 250×220×220 mm |
| Weight | — | 7.6 kg |
| Speed | ||
| Max speed | 500 mm/s 🏆 | 250 mm/s |
| Max acceleration | 12,000 mm/s² 🏆 | 5,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 300 °C 🏆 | 260 °C |
| Nozzle material | — | brass |
| Drive type | direct | direct |
| Flow rate | — | — |
| Bed | ||
| Max bed temp | 110 °C | 110 °C |
| Bed material | PEI | PEI plate |
| Auto-leveling | Auto 121-point (11x11) | LeviQ 2.0 auto mesh |
| Enclosed | No | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | No | No |
| AMS type | — | — |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | — | No |
| Camera | — | — |
| Calibration | ||
| Vibration compensation | — | Yes |
| Flow calibration | — | No |
| Input shaping | — | Yes |
| Pressure advance | — | Yes |
| Software | ||
| Official slicer | Cura | Anycubic Slicer Next |
| OrcaSlicer | — | Yes |
| Noise | ||
| Noise | — | — |
| Power | — | 350 W 🏆 |
Verdict
- If speed matters most, the Elegoo Neptune 4 Plus wins (500 mm/s vs 250 mm/s).
- On price, Elegoo Neptune 4 Plus is cheaper.
Frequently asked
- Which has better value: Elegoo Neptune 4 Plus or Anycubic Kobra 2?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Elegoo Neptune 4 Plus with 320×320×385 mm.