Elegoo Neptune 4 vs Creality Ender 3 V3 KE
The Elegoo Neptune 4 (2023, €249) and the Creality Ender 3 V3 KE (2023, €279) are two FDM 3D printers many people compare before buying.
The Elegoo Neptune 4 is the more affordable of the two, with a gap of about 30 (~11%) versus the other.
On the technical side, the Elegoo Neptune 4 offers more build volume (225×225×265 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Elegoo Neptune 4 €249 | Creality Ender 3 V3 KE €279 | |
|---|---|---|
| Geometry | ||
| Build volume | 225×225×265 mm 🏆 | 220×220×240 mm |
| Weight | 8.3 kg | 9.5 kg |
| Speed | ||
| Max speed | 500 mm/s | 500 mm/s |
| Max acceleration | 20,000 mm/s² 🏆 | 8,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 300 °C | 300 °C |
| Nozzle material | — | copper alloy |
| Drive type | direct | direct |
| Flow rate | — | 32 mm³/s 🏆 |
| Bed | ||
| Max bed temp | 110 °C 🏆 | 100 °C |
| Bed material | PEI | PEI plate |
| Auto-leveling | 121-point automatic (inductive sensor) | CR Touch + strain gauge |
| Enclosed | No | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | No | No |
| AMS type | — | — |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | No | Yes |
| Ethernet | — | Yes |
| Camera | — | — |
| Calibration | ||
| Vibration compensation | — | Yes |
| Flow calibration | — | Yes |
| Input shaping | — | Yes |
| Pressure advance | — | Yes |
| Software | ||
| Official slicer | Cura (Elegoo edition) | Creality Print |
| OrcaSlicer | — | Yes |
| Noise | ||
| Noise | 50 dB 🏆 | — |
| Power | 310 W 🏆 | 350 W |
Verdict
- On price, Elegoo Neptune 4 is cheaper.
Frequently asked
- Which has better value: Elegoo Neptune 4 or Creality Ender 3 V3 KE?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Elegoo Neptune 4 with 225×225×265 mm.