Creality K2 SE vs Sovol SV06 ACE
The Creality K2 SE (2025, €289) and the Sovol SV06 ACE (2024, €299) are two FDM 3D printers many people compare before buying.
On the technical side, only the Creality K2 SE supports multicolor (AMS), and the Sovol SV06 ACE offers more build volume (220×220×250 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Creality K2 SE €289 | Sovol SV06 ACE €299 | |
|---|---|---|
| Geometry | ||
| Build volume | 220×215×245 mm | 220×220×250 mm |
| Weight | 10.58 kg | — |
| Speed | ||
| Max speed | 500 mm/s | 600 mm/s 🏆 |
| Max acceleration | 20,000 mm/s² | 20,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 300 °C | 300 °C |
| Nozzle material | — | brass |
| Drive type | direct | direct |
| Flow rate | — | — |
| Bed | ||
| Max bed temp | 100 °C | 100 °C |
| Bed material | — | PEI |
| Auto-leveling | Full-auto leveling | automatic (pressure sensor) |
| Enclosed | No | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | Yes 🏆 | No |
| AMS type | CFS | — |
| AMS slots | 4 🏆 | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | — | — |
| Camera | — | Yes () |
| Calibration | ||
| Vibration compensation | — | — |
| Flow calibration | — | — |
| Input shaping | — | — |
| Pressure advance | — | — |
| Software | ||
| Official slicer | Creality Print 6.0 | OrcaSlicer |
| OrcaSlicer | — | — |
| Noise | ||
| Noise | — | — |
| Power | 350 W 🏆 | 360 W |
Verdict
- If speed matters most, the Sovol SV06 ACE wins.
- On price, Creality K2 SE is cheaper.
Frequently asked
- Which has better value: Creality K2 SE or Sovol SV06 ACE?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Sovol SV06 ACE with 220×220×250 mm.