Bambu Lab A1 Mini vs Sovol SV06 ACE
The Bambu Lab A1 Mini (2023, €299) and the Sovol SV06 ACE (2024, €299) are two FDM 3D printers many people compare before buying.
On the technical side, only the Bambu Lab A1 Mini supports multicolor (AMS), and the Sovol SV06 ACE offers more build volume (220×220×250 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Bambu Lab A1 Mini €299 | Sovol SV06 ACE €299 | |
|---|---|---|
| Geometry | ||
| Build volume | 180³ mm | 220×220×250 mm 🏆 |
| Weight | 5.5 kg | — |
| Speed | ||
| Max speed | 500 mm/s | 600 mm/s 🏆 |
| Max acceleration | 10,000 mm/s² | 20,000 mm/s² 🏆 |
| Hot-end | ||
| Max nozzle temp | 300 °C | 300 °C |
| Nozzle material | stainless steel | brass |
| Drive type | direct | direct |
| Flow rate | 28 mm³/s 🏆 | — |
| Bed | ||
| Max bed temp | 80 °C | 100 °C 🏆 |
| Bed material | PEI plate | PEI |
| Auto-leveling | load cell + auto mesh | automatic (pressure sensor) |
| Enclosed | No | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | Yes 🏆 | No |
| AMS type | lite | — |
| AMS slots | 4 🏆 | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | No | — |
| Camera | Yes (1080p) | Yes () |
| Calibration | ||
| Vibration compensation | Yes | — |
| Flow calibration | Yes | — |
| Input shaping | Yes | — |
| Pressure advance | Yes | — |
| Software | ||
| Official slicer | Bambu Studio | OrcaSlicer |
| OrcaSlicer | Yes | — |
| Noise | ||
| Noise | 48 dB 🏆 | — |
| Power | 150 W 🏆 | 360 W |
Verdict
- If speed matters most, the Sovol SV06 ACE wins.
Frequently asked
- Which has better value: Bambu Lab A1 Mini or Sovol SV06 ACE?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Sovol SV06 ACE with 220×220×250 mm.