Creality K2 SE vs Flashforge Adventurer 5M
The Creality K2 SE (2025, €289) and the Flashforge Adventurer 5M (2023, €299) are two FDM 3D printers many people compare before buying.
On the technical side, only the Creality K2 SE supports multicolor (AMS), and the Creality K2 SE offers more build volume (220×215×245 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Creality K2 SE €289 | Flashforge Adventurer 5M €299 | |
|---|---|---|
| Geometry | ||
| Build volume | 220×215×245 mm | 220³ mm |
| Weight | 10.58 kg | 10.8 kg |
| Speed | ||
| Max speed | 500 mm/s | 600 mm/s 🏆 |
| Max acceleration | 20,000 mm/s² | 20,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 300 °C 🏆 | 280 °C |
| Nozzle material | — | brass |
| Drive type | direct | direct |
| Flow rate | — | 32 mm³/s 🏆 |
| Bed | ||
| Max bed temp | 100 °C | 110 °C 🏆 |
| Bed material | — | PEI plate (dual-sided) |
| Auto-leveling | Full-auto leveling | auto mesh one-click |
| Enclosed | No | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | Yes 🏆 | No |
| AMS type | CFS | — |
| AMS slots | 4 🏆 | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | — | Yes |
| Camera | — | — |
| Calibration | ||
| Vibration compensation | — | Yes |
| Flow calibration | — | No |
| Input shaping | — | Yes |
| Pressure advance | — | Yes |
| Software | ||
| Official slicer | Creality Print 6.0 | FlashPrint / Orca-Flashforge |
| OrcaSlicer | — | Yes |
| Noise | ||
| Noise | — | — |
| Power | 350 W | 350 W |
Verdict
- If speed matters most, the Flashforge Adventurer 5M wins.
- On price, Creality K2 SE is cheaper.
Frequently asked
- Which has better value: Creality K2 SE or Flashforge Adventurer 5M?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Flashforge Adventurer 5M with 220³ mm.