Creality K2 Pro vs Flashforge Creator 5 Pro
The Creality K2 Pro (2025, $849) and the Flashforge Creator 5 Pro (2025, €929) are two FDM 3D printers many people compare before buying.
The Creality K2 Pro is the more affordable of the two, with a gap of about 80 (~9%) versus the other.
On the technical side, the Creality K2 Pro offers more build volume (300³ mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Creality K2 Pro $849 | Flashforge Creator 5 Pro €929 | |
|---|---|---|
| Geometry | ||
| Build volume | 300³ mm 🏆 | 256³ mm |
| Weight | 23.7 kg | 18 kg |
| Speed | ||
| Max speed | 600 mm/s | 600 mm/s |
| Max acceleration | 20,000 mm/s² | 30,000 mm/s² 🏆 |
| Hot-end | ||
| Max nozzle temp | 300 °C | 320 °C 🏆 |
| Nozzle material | hardened steel | hardened steel |
| Drive type | direct | direct |
| Flow rate | — | — |
| Bed | ||
| Max bed temp | 110 °C | 120 °C 🏆 |
| Bed material | PEI | PEI |
| Auto-leveling | full-auto | automatic |
| Enclosed | Yes | Yes |
| Heated chamber | Yes | Yes |
| Multimaterial | ||
| AMS compatible | Yes | Yes |
| AMS type | CFS | toolchanger |
| AMS slots | — | 4 🏆 |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | — | — |
| Camera | Yes () | Yes () |
| Calibration | ||
| Vibration compensation | — | — |
| Flow calibration | — | — |
| Input shaping | — | — |
| Pressure advance | — | — |
| Software | ||
| Official slicer | Creality Print 6.0 | Orca-Flashforge / OrcaSlicer |
| OrcaSlicer | — | — |
| Noise | ||
| Noise | — | 55 dB 🏆 |
| Power | 1300 W | 1200 W 🏆 |
Verdict
- On price, Flashforge Creator 5 Pro is cheaper.
Frequently asked
- Which has better value: Creality K2 Pro or Flashforge Creator 5 Pro?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Creality K2 Pro with 300³ mm.