Creality Ender 3 V3 vs QIDI Tech X-Smart 3
The Creality Ender 3 V3 (2024, €399) and the QIDI Tech X-Smart 3 (2023, €399) are two FDM 3D printers many people compare before buying.
On the technical side, only the QIDI Tech X-Smart 3 is enclosed (better for ABS and technical materials), and the Creality Ender 3 V3 offers more build volume (220×220×250 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Creality Ender 3 V3 €399 | QIDI Tech X-Smart 3 €399 | |
|---|---|---|
| Geometry | ||
| Build volume | 220×220×250 mm 🏆 | 175×180×170 mm |
| Weight | 7.83 kg | 10.5 kg |
| Speed | ||
| Max speed | 600 mm/s 🏆 | 500 mm/s |
| Max acceleration | 20,000 mm/s² | 20,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 300 °C | 300 °C |
| Nozzle material | hardened steel | brass |
| Drive type | direct | direct |
| Flow rate | 32 mm³/s 🏆 | — |
| Bed | ||
| Max bed temp | 110 °C | 120 °C 🏆 |
| Bed material | PEI plate | flexible magnetic HF plate |
| Auto-leveling | auto mesh + strain gauge | automatic 16-point |
| Enclosed | No | Yes 🏆 |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | No | No |
| AMS type | — | — |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | No | — |
| Camera | — | — |
| Calibration | ||
| Vibration compensation | Yes | — |
| Flow calibration | No | — |
| Input shaping | Yes | — |
| Pressure advance | Yes | — |
| Software | ||
| Official slicer | Creality Print | QIDI Print |
| OrcaSlicer | Yes | — |
| Noise | ||
| Noise | — | — |
| Power | 350 W | 350 W |
Verdict
- If speed matters most, the Creality Ender 3 V3 wins (600 mm/s vs 500 mm/s).
Frequently asked
- Which has better value: Creality Ender 3 V3 or QIDI Tech X-Smart 3?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Creality Ender 3 V3 with 220×220×250 mm.