Artillery Sidewinder X4 Plus vs Artillery M1 Pro
The Artillery Sidewinder X4 Plus (2024, €335) and the Artillery M1 Pro (2025, €349) are two FDM 3D printers many people compare before buying.
On the technical side, only the Artillery M1 Pro is enclosed (better for ABS and technical materials), and the Artillery Sidewinder X4 Plus offers more build volume (300×300×400 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Artillery Sidewinder X4 Plus €335 | Artillery M1 Pro €349 | |
|---|---|---|
| Geometry | ||
| Build volume | 300×300×400 mm 🏆 | 260³ mm |
| Weight | — | 14 kg |
| Speed | ||
| Max speed | 500 mm/s | 600 mm/s 🏆 |
| Max acceleration | 12,000 mm/s² | 20,000 mm/s² 🏆 |
| Hot-end | ||
| Max nozzle temp | 300 °C | 320 °C 🏆 |
| Nozzle material | — | hardened steel |
| Drive type | direct | direct |
| Flow rate | — | — |
| Bed | ||
| Max bed temp | 100 °C | 120 °C 🏆 |
| Bed material | PEI | PEI |
| Auto-leveling | automatic 121-point | auto |
| Enclosed | No | Yes 🏆 |
| Heated chamber | No | Yes 🏆 |
| Multimaterial | ||
| AMS compatible | No | No |
| AMS type | — | — |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | — | — |
| Camera | — | Yes () |
| Calibration | ||
| Vibration compensation | — | — |
| Flow calibration | — | — |
| Input shaping | — | — |
| Pressure advance | — | — |
| Software | ||
| Official slicer | OrcaSlicer / Cura / Artillery Slicer | Orca Slicer / Artillery Slicer |
| OrcaSlicer | — | — |
| Noise | ||
| Noise | — | — |
| Power | 450 W 🏆 | 1150 W |
Verdict
- If speed matters most, the Artillery M1 Pro wins.
- On price, Artillery Sidewinder X4 Plus is cheaper.
Frequently asked
- Which has better value: Artillery Sidewinder X4 Plus or Artillery M1 Pro?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Artillery Sidewinder X4 Plus with 300×300×400 mm.