Anycubic Kobra 3 vs Anycubic Kobra 4
The Anycubic Kobra 3 (2024, €369) and the Anycubic Kobra 4 (2026, €379) are two FDM 3D printers many people compare before buying.
On the technical side, the Anycubic Kobra 4 offers more build volume (260³ mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Anycubic Kobra 3 €369 | Anycubic Kobra 4 €379 | |
|---|---|---|
| Geometry | ||
| Build volume | 250×250×260 mm | 260³ mm 🏆 |
| Weight | 9.6 kg | — |
| Speed | ||
| Max speed | 600 mm/s | 600 mm/s |
| Max acceleration | 20,000 mm/s² | 20,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 300 °C | 300 °C |
| Nozzle material | brass | hardened steel |
| Drive type | direct | direct |
| Flow rate | 32 mm³/s 🏆 | — |
| Bed | ||
| Max bed temp | 110 °C 🏆 | 100 °C |
| Bed material | PEI plate | PEI spring steel |
| Auto-leveling | LeviQ 3.0 25-point | 49-point automatic (LeviQ 3.0) |
| Enclosed | No | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | Yes | Yes |
| AMS type | ACE Pro | ACE Pro |
| AMS slots | 4 | 4 |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | No | — |
| Camera | Yes (720p) | Yes () |
| Calibration | ||
| Vibration compensation | Yes | — |
| Flow calibration | Yes | — |
| Input shaping | Yes | — |
| Pressure advance | Yes | — |
| Software | ||
| Official slicer | Anycubic Slicer Next | Anycubic Slicer Next |
| OrcaSlicer | Yes | — |
| Noise | ||
| Noise | — | 48 dB 🏆 |
| Power | 400 W 🏆 | — |
Verdict
- On price, Anycubic Kobra 3 is cheaper.
Frequently asked
- Which has better value: Anycubic Kobra 3 or Anycubic Kobra 4?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Anycubic Kobra 4 with 260³ mm.