Anycubic Kobra 3 vs QIDI Tech Q2C
The Anycubic Kobra 3 (2024, €369) and the QIDI Tech Q2C (2025, €379) are two FDM 3D printers many people compare before buying.
On the technical side, only the QIDI Tech Q2C is enclosed (better for ABS and technical materials), and the QIDI Tech Q2C offers more build volume (270×270×256 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Anycubic Kobra 3 €369 | QIDI Tech Q2C €379 | |
|---|---|---|
| Geometry | ||
| Build volume | 250×250×260 mm | 270×270×256 mm 🏆 |
| Weight | 9.6 kg | 16.9 kg |
| Speed | ||
| Max speed | 600 mm/s | 600 mm/s |
| Max acceleration | 20,000 mm/s² | 20,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 300 °C | 370 °C 🏆 |
| Nozzle material | brass | Bimetal |
| Drive type | direct | direct |
| Flow rate | 32 mm³/s 🏆 | — |
| Bed | ||
| Max bed temp | 110 °C | 120 °C 🏆 |
| Bed material | PEI plate | Double-sided PEI Magnetic |
| Auto-leveling | LeviQ 3.0 25-point | Automatic (Loadcell Sensor) |
| Enclosed | No | Yes 🏆 |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | Yes | Yes |
| AMS type | ACE Pro | — |
| AMS slots | 4 | 4 |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | No | — |
| Camera | Yes (720p) | — |
| Calibration | ||
| Vibration compensation | Yes | — |
| Flow calibration | Yes | — |
| Input shaping | Yes | — |
| Pressure advance | Yes | — |
| Software | ||
| Official slicer | Anycubic Slicer Next | QIDI Studio |
| OrcaSlicer | Yes | — |
| Noise | ||
| Noise | — | — |
| Power | 400 W | 350 W 🏆 |
Verdict
- On price, Anycubic Kobra 3 is cheaper.
Frequently asked
- Which has better value: Anycubic Kobra 3 or QIDI Tech Q2C?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- QIDI Tech Q2C with 270×270×256 mm.