Anycubic Kobra 4 vs Bambu Lab A2L
The Anycubic Kobra 4 (2026, €379) and the Bambu Lab A2L (2026, €379) are two FDM 3D printers many people compare before buying.
On the technical side, the Bambu Lab A2L offers more build volume (330×320×325 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Anycubic Kobra 4 €379 | Bambu Lab A2L €379 | |
|---|---|---|
| Geometry | ||
| Build volume | 260³ mm | 330×320×325 mm 🏆 |
| Weight | — | 12.8 kg |
| Speed | ||
| Max speed | 600 mm/s 🏆 | 500 mm/s |
| Max acceleration | 20,000 mm/s² 🏆 | 10,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 300 °C | 300 °C |
| Nozzle material | hardened steel | stainless steel |
| Drive type | direct | direct |
| Flow rate | — | — |
| Bed | ||
| Max bed temp | 100 °C 🏆 | 80 °C |
| Bed material | PEI spring steel | Textured PEI plate |
| Auto-leveling | 49-point automatic (LeviQ 3.0) | hands-free auto + offset |
| Enclosed | No | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | Yes | Yes |
| AMS type | ACE Pro | lite |
| AMS slots | 4 | 4 |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | — | No |
| Camera | Yes () | Yes (1080p) |
| Calibration | ||
| Vibration compensation | — | Yes |
| Flow calibration | — | Yes |
| Input shaping | — | Yes |
| Pressure advance | — | Yes |
| Software | ||
| Official slicer | Anycubic Slicer Next | Bambu Studio |
| OrcaSlicer | — | Yes |
| Noise | ||
| Noise | 48 dB 🏆 | 52 dB |
| Power | — | — |
Verdict
- If speed matters most, the Anycubic Kobra 4 wins (600 mm/s vs 500 mm/s).
Frequently asked
- Which has better value: Anycubic Kobra 4 or Bambu Lab A2L?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Bambu Lab A2L with 330×320×325 mm.