Anycubic Kobra 2 Pro vs Flashforge Adventurer 5M Pro
Full 2026 comparison: side-by-side specs and data-driven verdict.
← Swipe to see more →
| Specifications | Anycubic Kobra 2 Pro €369 | Flashforge Adventurer 5M Pro €449 |
|---|---|---|
| Geometry | ||
| Build volume | 220×220×250 mm | 220³ mm |
| Weight | 8.5 kg | 20.1 kg |
| Speed | ||
| Max speed | 500 mm/s | 600 mm/s 🏆 |
| Max acceleration | 20,000 mm/s² | 20,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 260 °C | 280 °C 🏆 |
| Nozzle material | brass | brass |
| Drive type | direct | direct |
| Flow rate | 25 mm³/s | 32 mm³/s 🏆 |
| Bed | ||
| Max bed temp | 110 °C | 110 °C |
| Bed material | PEI plate | PEI plate (dual-sided) |
| Auto-leveling | LeviQ 2.0 | auto mesh one-click |
| Enclosed | No | Yes 🏆 |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | No | No |
| AMS type | — | — |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | No | Yes |
| Camera | — | Yes (1080p) |
| Calibration | ||
| Vibration compensation | Yes | Yes |
| Flow calibration | No | No |
| Input shaping | Yes | Yes |
| Pressure advance | Yes | Yes |
| Software | ||
| Official slicer | Anycubic Slicer Next | FlashPrint / Orca-Flashforge |
| OrcaSlicer | Yes | Yes |
| Noise | ||
| Noise | — | — |
| Power | 350 W | 350 W |
Verdict
- If speed matters most, the Flashforge Adventurer 5M Pro wins.
- On price, Anycubic Kobra 2 Pro is cheaper.
Frequently asked
- Which has better value: Anycubic Kobra 2 Pro or Flashforge Adventurer 5M Pro?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Flashforge Adventurer 5M Pro with 220³ mm.