Creality
K2
The Creality K2 is a FDM 3D printer released in 2025 by Creality, with a build volume of 260³ mm and MSRP of €359. Compatible with multi-material system CFS (4 slots). Enclosed chamber. Maximum speed 600 mm/s. Current status: active.
€359 Manufacturer's MSRP
Manufacturer's suggested retail price (MSRP). Not the Amazon price — the actual price in stores may vary.
Technical specifications
| Technology | FDM |
|---|---|
| Build volume | 260³ mm |
| Weight | 18.3 kg |
| Max speed | 600 mm/s |
| Max acceleration | 20,000 mm/s² |
| Max nozzle temp | 300 °C |
| Nozzle material | Titanium heatbreak, copper body, hardened steel tip |
| Drive | direct |
| Flow rate | — |
| Max bed temp | 100 °C |
| Bed material | PEI-coated flexible magnetic steel |
| Auto-leveling | Smart Auto Leveling (strain sensor) |
| Enclosed | Yes |
| Heated chamber | No |
| AMS compatible | Yes (CFS, 4 slots) |
| WiFi | Yes |
| Camera included | Yes () |
| Official slicer | Creality Print |
| OrcaSlicer support | — |
| Power | — |
| Noise | — |
What materials can it print?
Compatibility derived from its verified specs. See the full materials guide →
| Material | Prints it? | Why |
|---|---|---|
| PLA | Yes | Yes. PLA has no special needs: any FDM printer like the K2 prints it out of the box. |
| PETG | Yes | Yes. With a nozzle up to 300 °C and a bed up to 100 °C it comfortably meets PETG's needs. |
| TPU (flexible) | Yes | Yes. It has a direct-drive extruder, ideal for flexibles; prints TPU well (go slow). |
| ABS | Yes | Yes. Nozzle up to 300 °C and an enclosure: it contains ABS's warping and fumes. |
| ASA | Yes | Yes. Nozzle up to 300 °C and an enclosure: it contains ASA's warping and fumes. |
| Nylon (PA) | Yes | Yes. It reaches 300 °C and is enclosed: it prints Nylon (dry it well first). For carbon-fibre variants, use a hardened-steel nozzle. |
| Policarbonato (PC) | Yes | Yes. Nozzle up to 300 °C and an enclosure: suitable for PC. For carbon-fibre variants, use a hardened-steel nozzle. |
Popular comparisons
Sources & references
Specs cross-checked against these public sources:
- 3DPros - Creality K2 spec databasesecondary