Anycubic
Photon Mono 4
The Anycubic Photon Mono 4 is a MSLA 3D printer released in 2024 by Anycubic, with a build volume of 153×87×165 mm and MSRP of €212. Maximum speed — mm/s. Current status: active.
€212 Manufacturer's MSRP
Manufacturer's suggested retail price (MSRP). Not the Amazon price — the actual price in stores may vary.
Technical specifications
| Technology | MSLA |
|---|---|
| Build volume | 153×87×165 mm |
| Weight | 4 kg |
| Max speed | — |
| Max acceleration | — |
| Max nozzle temp | — |
| Nozzle material | — |
| Drive | — |
| Flow rate | — |
| Max bed temp | — |
| Bed material | — |
| Auto-leveling | Manual 4-point |
| Enclosed | No |
| Heated chamber | No |
| AMS compatible | No |
| WiFi | No |
| Camera included | No |
| Official slicer | Photon Workshop |
| OrcaSlicer support | — |
| Power | 54 W |
| Noise | — |
What materials can it print?
Compatibility derived from its verified specs. See the full materials guide →
The Photon Mono 4 is a resin printer (MSLA): it doesn't use filament. It works with standard 405 nm UV resins from virtually any brand (open system): standard, ABS-like/tough, water-washable, flexible and castable. Engineering or high-temperature resins depend on LCD power and ventilation; follow the resin maker's guidance.
Popular comparisons
Sources & references
Specs cross-checked against these public sources:
- Anycubic Official Store - Photon Mono 4manufacturer
- 3DJake - Anycubic Photon Mono 4retailer
- Amazon - ANYCUBIC Photon Mono 4retailer