QIDI Tech X-Max 3 vs QIDI Tech Max4
The QIDI Tech X-Max 3 (2023, €999) and the QIDI Tech Max4 (2026, €1,160) are two FDM 3D printers many people compare before buying.
The QIDI Tech X-Max 3 is the more affordable of the two, with a gap of about 160.56999999999994 (~14%) versus the other.
On the technical side, only the QIDI Tech Max4 supports multicolor (AMS), and the QIDI Tech Max4 offers more build volume (390×390×340 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| QIDI Tech X-Max 3 €999 | QIDI Tech Max4 €1,160 | |
|---|---|---|
| Geometry | ||
| Build volume | 325×325×315 mm | 390×390×340 mm 🏆 |
| Weight | 30.2 kg | 40 kg |
| Speed | ||
| Max speed | 600 mm/s | 800 mm/s 🏆 |
| Max acceleration | 20,000 mm/s² | 30,000 mm/s² 🏆 |
| Hot-end | ||
| Max nozzle temp | 350 °C | 370 °C 🏆 |
| Nozzle material | hardened steel | Bimetal |
| Drive type | direct | direct |
| Flow rate | 35 mm³/s 🏆 | — |
| Bed | ||
| Max bed temp | 120 °C | 120 °C |
| Bed material | PEI plate | PEI |
| Auto-leveling | auto mesh | Automatic (load cell) |
| Enclosed | Yes | Yes |
| Heated chamber | Yes | Yes |
| Multimaterial | ||
| AMS compatible | No | Yes 🏆 |
| AMS type | — | CFS |
| AMS slots | — | 4 🏆 |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | Yes | — |
| Camera | Yes (720p) | Yes () |
| Calibration | ||
| Vibration compensation | Yes | — |
| Flow calibration | Yes | — |
| Input shaping | Yes | — |
| Pressure advance | Yes | — |
| Software | ||
| Official slicer | Qidi Slicer (OrcaSlicer fork) | QIDI Studio |
| OrcaSlicer | Yes | — |
| Noise | ||
| Noise | — | — |
| Power | 1000 W 🏆 | 1350 W |
Verdict
- If speed matters most, the QIDI Tech Max4 wins.
- On price, QIDI Tech X-Max 3 is cheaper.
Frequently asked
- Which has better value: QIDI Tech X-Max 3 or QIDI Tech Max4?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- QIDI Tech Max4 with 390×390×340 mm.