Prusa Research XL vs Elegoo OrangeStorm Giga
The Prusa Research XL (2023, €1,999) and the Elegoo OrangeStorm Giga (2023, €2,399) are two FDM 3D printers many people compare before buying.
The Prusa Research XL is the more affordable of the two, with a gap of about 400 (~17%) versus the other.
On the technical side, the Elegoo OrangeStorm Giga offers more build volume (800×800×1000 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Prusa Research XL €1,999 | Elegoo OrangeStorm Giga €2,399 | |
|---|---|---|
| Geometry | ||
| Build volume | 360³ mm | 800×800×1000 mm 🏆 |
| Weight | 47 kg | 145 kg |
| Speed | ||
| Max speed | 350 mm/s 🏆 | 300 mm/s |
| Max acceleration | 10,000 mm/s² 🏆 | 5,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 290 °C | 300 °C 🏆 |
| Nozzle material | hardened steel | brass |
| Drive type | direct | direct |
| Flow rate | 30 mm³/s 🏆 | — |
| Bed | ||
| Max bed temp | 120 °C 🏆 | 100 °C |
| Bed material | PEI plate (segmented) | Magnetic PEI Steel |
| Auto-leveling | load cell auto mesh | automatic (contactless high-precision sensor) |
| Enclosed | No | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | No | No |
| AMS type | toolchanger | — |
| AMS slots | 5 🏆 | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | Yes | — |
| Camera | — | — |
| Calibration | ||
| Vibration compensation | Yes | — |
| Flow calibration | No | — |
| Input shaping | Yes | — |
| Pressure advance | Yes | — |
| Software | ||
| Official slicer | PrusaSlicer | — |
| OrcaSlicer | Yes | — |
| Noise | ||
| Noise | — | — |
| Power | 350 W 🏆 | — |
Verdict
- If speed matters most, the Prusa Research XL wins (350 mm/s vs 300 mm/s).
- On price, Prusa Research XL is cheaper.
Frequently asked
- Which has better value: Prusa Research XL or Elegoo OrangeStorm Giga?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Elegoo OrangeStorm Giga with 800×800×1000 mm.