Elegoo OrangeStorm Giga vs Snapmaker Artisan
The Elegoo OrangeStorm Giga (2023, €2,399) and the Snapmaker Artisan (2023, €2,499) are two FDM 3D printers many people compare before buying.
On the technical side, only the Snapmaker Artisan is enclosed (better for ABS and technical materials), and the Elegoo OrangeStorm Giga offers more build volume (800×800×1000 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Elegoo OrangeStorm Giga €2,399 | Snapmaker Artisan €2,499 | |
|---|---|---|
| Geometry | ||
| Build volume | 800×800×1000 mm 🏆 | 350×400×400 mm |
| Weight | 145 kg | — |
| Speed | ||
| Max speed | 300 mm/s 🏆 | 180 mm/s |
| Max acceleration | 5,000 mm/s² 🏆 | — |
| Hot-end | ||
| Max nozzle temp | 300 °C | 300 °C |
| Nozzle material | brass | brass |
| Drive type | direct | direct |
| Flow rate | — | — |
| Bed | ||
| Max bed temp | 100 °C | 110 °C 🏆 |
| Bed material | Magnetic PEI Steel | PEI |
| Auto-leveling | automatic (contactless high-precision sensor) | automatic |
| Enclosed | No | Yes 🏆 |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | No | No |
| AMS type | — | — |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | — | — |
| Camera | — | Yes () |
| Calibration | ||
| Vibration compensation | — | — |
| Flow calibration | — | — |
| Input shaping | — | — |
| Pressure advance | — | — |
| Software | ||
| Official slicer | — | Snapmaker Luban |
| OrcaSlicer | — | — |
| Noise | ||
| Noise | — | — |
| Power | — | 750 W 🏆 |
Verdict
- If speed matters most, the Elegoo OrangeStorm Giga wins (300 mm/s vs 180 mm/s).
- On price, Elegoo OrangeStorm Giga is cheaper.
Frequently asked
- Which has better value: Elegoo OrangeStorm Giga or Snapmaker Artisan?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Elegoo OrangeStorm Giga with 800×800×1000 mm.