Flashforge Adventurer 5M Pro vs Flashforge Adventurer 5X
👁 This comparison has been viewed 4 times · 4 this month · 1 this week
The Flashforge Adventurer 5M Pro (2023, €449) and the Flashforge Adventurer 5X (2025, €579) are two FDM 3D printers many people compare before buying.
The Flashforge Adventurer 5M Pro is the more affordable of the two, with a gap of about 130 (~22%) versus the other.
On the technical side, only the Flashforge Adventurer 5M Pro is enclosed (better for ABS and technical materials), and only the Flashforge Adventurer 5X supports multicolor (AMS).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Flashforge Adventurer 5M Pro €449 | Flashforge Adventurer 5X €579 | |
|---|---|---|
| Geometry | ||
| Build volume | 220³ mm | 220³ mm |
| Weight | 20.1 kg | 11 kg |
| Speed | ||
| Max speed | 600 mm/s | 600 mm/s |
| Max acceleration | 20,000 mm/s² | 20,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 280 °C | 300 °C 🏆 |
| Nozzle material | brass | — |
| Drive type | direct | direct |
| Flow rate | 32 mm³/s 🏆 | — |
| Bed | ||
| Max bed temp | 110 °C | 110 °C |
| Bed material | PEI plate (dual-sided) | PEI |
| Auto-leveling | auto mesh one-click | automatic |
| Enclosed | Yes 🏆 | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | No | Yes 🏆 |
| AMS type | — | — |
| AMS slots | — | 4 🏆 |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | Yes | — |
| Camera | Yes (1080p) | — |
| Calibration | ||
| Vibration compensation | Yes | — |
| Flow calibration | No | — |
| Input shaping | Yes | — |
| Pressure advance | Yes | — |
| Software | ||
| Official slicer | FlashPrint / Orca-Flashforge | Orca-Flashforge |
| OrcaSlicer | Yes | — |
| Noise | ||
| Noise | — | — |
| Power | 350 W 🏆 | 650 W |
Verdict
- On price, Flashforge Adventurer 5M Pro is cheaper.
Frequently asked
- Which has better value: Flashforge Adventurer 5M Pro or Flashforge Adventurer 5X?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Flashforge Adventurer 5X with 220³ mm.