Bambu Lab A2L vs Anycubic Kobra X
The Bambu Lab A2L (2026, €379) and the Anycubic Kobra X (2026, €389) are two FDM 3D printers many people compare before buying.
On the technical side, the Bambu Lab A2L offers more build volume (330×320×325 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Bambu Lab A2L €379 | Anycubic Kobra X €389 | |
|---|---|---|
| Geometry | ||
| Build volume | 330×320×325 mm 🏆 | 260³ mm |
| Weight | 12.8 kg | 9.5 kg |
| Speed | ||
| Max speed | 500 mm/s | 600 mm/s 🏆 |
| Max acceleration | 10,000 mm/s² | 20,000 mm/s² 🏆 |
| Hot-end | ||
| Max nozzle temp | 300 °C | 300 °C |
| Nozzle material | stainless steel | Hardened steel |
| Drive type | direct | direct |
| Flow rate | — | — |
| Bed | ||
| Max bed temp | 80 °C | 110 °C 🏆 |
| Bed material | Textured PEI plate | PEI |
| Auto-leveling | hands-free auto + offset | LeviQ 3.0 (49-point mesh) |
| Enclosed | No | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | Yes | Yes |
| AMS type | lite | ACE Pro |
| AMS slots | 4 | 4 |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | No | — |
| Camera | Yes (1080p) | Yes () |
| Calibration | ||
| Vibration compensation | Yes | — |
| Flow calibration | Yes | — |
| Input shaping | Yes | — |
| Pressure advance | Yes | — |
| Software | ||
| Official slicer | Bambu Studio | Anycubic Slicer Next |
| OrcaSlicer | Yes | — |
| Noise | ||
| Noise | 52 dB | 45 dB 🏆 |
| Power | — | 1450 W 🏆 |
Verdict
- If speed matters most, the Anycubic Kobra X wins.
- On price, Bambu Lab A2L is cheaper.
Frequently asked
- Which has better value: Bambu Lab A2L or Anycubic Kobra X?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Bambu Lab A2L with 330×320×325 mm.