Snapmaker
J1s
The Snapmaker J1s is a FDM 3D printer released in 2022 by Snapmaker, with a build volume of 300×200×200 mm and MSRP of €1,789. Enclosed chamber. Maximum speed 350 mm/s. Current status: active.
€1,789 Manufacturer's MSRP
Manufacturer's suggested retail price (MSRP). Not the Amazon price — the actual price in stores may vary.
Technical specifications
| Technology | FDM |
|---|---|
| Build volume | 300×200×200 mm |
| Weight | 27.8 kg |
| Max speed | 350 mm/s |
| Max acceleration | 10,000 mm/s² |
| Max nozzle temp | 300 °C |
| Nozzle material | — |
| Drive | direct |
| Flow rate | — |
| Max bed temp | 100 °C |
| Bed material | PEI glass |
| Auto-leveling | automatic (3-point) |
| Enclosed | Yes |
| Heated chamber | No |
| AMS compatible | No |
| WiFi | Yes |
| Camera included | No |
| Official slicer | Snapmaker Luban |
| OrcaSlicer support | — |
| Power | 400 W |
| Noise | — |
What materials can it print?
Compatibility derived from its verified specs. See the full materials guide →
| Material | Prints it? | Why |
|---|---|---|
| PLA | Yes | Yes. PLA has no special needs: any FDM printer like the J1s prints it out of the box. |
| PETG | Yes | Yes. With a nozzle up to 300 °C and a bed up to 100 °C it comfortably meets PETG's needs. |
| TPU (flexible) | Yes | Yes. It has a direct-drive extruder, ideal for flexibles; prints TPU well (go slow). |
| ABS | Yes | Yes. Nozzle up to 300 °C and an enclosure: it contains ABS's warping and fumes. |
| ASA | Yes | Yes. Nozzle up to 300 °C and an enclosure: it contains ASA's warping and fumes. |
| Nylon (PA) | Yes | Yes. It reaches 300 °C and is enclosed: it prints Nylon (dry it well first). For carbon-fibre variants, use a hardened-steel nozzle. |
| Policarbonato (PC) | Yes | Yes. Nozzle up to 300 °C and an enclosure: suitable for PC. For carbon-fibre variants, use a hardened-steel nozzle. |
Popular comparisons
Sources & references
Specs cross-checked against these public sources:
- Snapmaker J1s Official Product Pagemanufacturer