Product image from the manufacturer or its official distributor, reproduced to identify the model (legal notice).
Q2C
The QIDI Tech Q2C is a FDM 3D printer released in 2025 by QIDI Tech, with a build volume of 270×270×256 mm and MSRP of €379. Compatible with multi-material system AMS (4 slots). Enclosed chamber. Maximum speed 600 mm/s. Current status: active.
Manufacturer's suggested retail price (MSRP). Not the store price — the actual price may vary.
👁 5 views · 3 this month · 1 this week
Technical specifications
| Technology | FDM |
|---|---|
| Build volume | 270×270×256 mm |
| Weight | 16.9 kg |
| Max speed | 600 mm/s |
| Max acceleration | 20,000 mm/s² |
| Max nozzle temp | 370 °C |
| Nozzle material | Bimetal |
| Drive | direct |
| Flow rate | — |
| Max bed temp | 120 °C |
| Bed material | Double-sided PEI Magnetic |
| Auto-leveling | Automatic (Loadcell Sensor) |
| Enclosed | Yes |
| Heated chamber | No |
| AMS compatible | Yes (, 4 slots) |
| WiFi | Yes |
| Camera included | No |
| Official slicer | QIDI Studio |
| OrcaSlicer support | — |
| Power | 350 W |
| Noise | — |
What materials can the Q2C print?
This comes from four facts on its spec sheet: the nozzle reaches 370 °C, the bed 120 °C, and the machine is enclosed with a direct-drive extruder. Those four facts decide most of the list: nozzle temperature sets the ceiling on what you can melt, the bed decides whether the first layer sticks, the enclosure keeps large parts from warping, and the extruder type rules flexibles. We don't test the machine — this is guidance derived from verified data, not a guarantee.
In short: it prints PLA, PETG, TPU (flexible), ABS, ASA, Nylon (PA), Policarbonato (PC) without a fight.
- PLAYes
Yes. PLA has no special needs: any FDM printer like the Q2C prints it out of the box.
- PETGYes
Yes. With a nozzle up to 370 °C and a bed up to 120 °C it comfortably meets PETG's needs.
- TPU (flexible)Yes
Yes. It has a direct-drive extruder, ideal for flexibles; prints TPU well (go slow).
- ABSYes
Yes. Nozzle up to 370 °C and an enclosure: it contains ABS's warping and fumes.
- ASAYes
Yes. Nozzle up to 370 °C and an enclosure: it contains ASA's warping and fumes.
- Nylon (PA)Yes
Yes. It reaches 370 °C and is enclosed: it prints Nylon (dry it well first). For carbon-fibre variants, use a hardened-steel nozzle.
- Policarbonato (PC)Yes
Yes. Nozzle up to 370 °C and an enclosure: suitable for PC. For carbon-fibre variants, use a hardened-steel nozzle.
| Material | Prints it? | Why |
|---|---|---|
| PLA | Yes | Yes. PLA has no special needs: any FDM printer like the Q2C prints it out of the box. |
| PETG | Yes | Yes. With a nozzle up to 370 °C and a bed up to 120 °C it comfortably meets PETG's needs. |
| TPU (flexible) | Yes | Yes. It has a direct-drive extruder, ideal for flexibles; prints TPU well (go slow). |
| ABS | Yes | Yes. Nozzle up to 370 °C and an enclosure: it contains ABS's warping and fumes. |
| ASA | Yes | Yes. Nozzle up to 370 °C and an enclosure: it contains ASA's warping and fumes. |
| Nylon (PA) | Yes | Yes. It reaches 370 °C and is enclosed: it prints Nylon (dry it well first). For carbon-fibre variants, use a hardened-steel nozzle. |
| Policarbonato (PC) | Yes | Yes. Nozzle up to 370 °C and an enclosure: suitable for PC. For carbon-fibre variants, use a hardened-steel nozzle. |
Popular comparisons
Community reviews
No reviews for this printer yet. Own it? Be the first. 👇
User opinions, moderated before publishing. hotend doesn't verify purchases.
Sources & references
Specs cross-checked against these public sources:
- QIDI Q2C Official Product Pagemanufacturer
- QIDI Q2C - QIDI US Storemanufacturer
- QIDI Q2C - QIDI EU Store (EUR pricing confirmed)manufacturer
- QIDI Q2C Combo on Amazonretailer
Specs checked against the sources cited above on 19/06/2026. Confidence in the data: high.