Prusa Research Mini+ vs Sovol SV07 Plus
Full 2026 comparison: side-by-side specs and data-driven verdict.
← Swipe to see more →
| Specifications | Prusa Research Mini+ €419 | Sovol SV07 Plus €499 |
|---|---|---|
| Geometry | ||
| Build volume | 180³ mm | 300×300×350 mm 🏆 |
| Weight | 4.5 kg | 13 kg |
| Speed | ||
| Max speed | 200 mm/s | 500 mm/s 🏆 |
| Max acceleration | 2,500 mm/s² | 12,000 mm/s² 🏆 |
| Hot-end | ||
| Max nozzle temp | 280 °C | 300 °C 🏆 |
| Nozzle material | brass | hardened steel |
| Drive type | bowden | direct |
| Flow rate | — | 32 mm³/s 🏆 |
| Bed | ||
| Max bed temp | 100 °C | 100 °C |
| Bed material | PEI plate | PEI plate |
| Auto-leveling | auto mesh | auto mesh |
| Enclosed | No | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | No | No |
| AMS type | — | — |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | Yes | Yes |
| Camera | — | — |
| Calibration | ||
| Vibration compensation | No | Yes |
| Flow calibration | No | No |
| Input shaping | No | Yes |
| Pressure advance | No | Yes |
| Software | ||
| Official slicer | PrusaSlicer | OrcaSlicer (Sovol fork) |
| OrcaSlicer | Yes | Yes |
| Noise | ||
| Noise | — | — |
| Power | 240 W 🏆 | 600 W |
Verdict
- If speed matters most, the Sovol SV07 Plus wins.
- On price, Prusa Research Mini+ is cheaper.
Frequently asked
- Which has better value: Prusa Research Mini+ or Sovol SV07 Plus?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Sovol SV07 Plus with 300×300×350 mm.