Creality K1C vs Flashforge Adventurer 5X
The Creality K1C (2024, €559) and the Flashforge Adventurer 5X (2025, €579) are two FDM 3D printers many people compare before buying.
On the technical side, only the Creality K1C is enclosed (better for ABS and technical materials), and only the Flashforge Adventurer 5X supports multicolor (AMS).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Creality K1C €559 | Flashforge Adventurer 5X €579 | |
|---|---|---|
| Geometry | ||
| Build volume | 220×220×250 mm | 220³ mm |
| Weight | 12.5 kg | 11 kg |
| Speed | ||
| Max speed | 600 mm/s | 600 mm/s |
| Max acceleration | 20,000 mm/s² | 20,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 300 °C | 300 °C |
| Nozzle material | hardened steel | — |
| Drive type | direct | direct |
| Flow rate | 32 mm³/s 🏆 | — |
| Bed | ||
| Max bed temp | 100 °C | 110 °C 🏆 |
| Bed material | PEI plate | PEI |
| Auto-leveling | auto mesh + strain gauge | automatic |
| Enclosed | Yes 🏆 | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | No | Yes 🏆 |
| AMS type | — | — |
| AMS slots | — | 4 🏆 |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | Yes | — |
| Camera | Yes (1080p) | — |
| Calibration | ||
| Vibration compensation | Yes | — |
| Flow calibration | Yes | — |
| Input shaping | Yes | — |
| Pressure advance | Yes | — |
| Software | ||
| Official slicer | Creality Print | Orca-Flashforge |
| OrcaSlicer | Yes | — |
| Noise | ||
| Noise | — | — |
| Power | 350 W 🏆 | 650 W |
Verdict
- On price, Creality K1C is cheaper.
Frequently asked
- Which has better value: Creality K1C or Flashforge Adventurer 5X?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Flashforge Adventurer 5X with 220³ mm.