Creality K1 vs QIDI Tech Q2
👁 This comparison has been viewed 1 times · 1 this month · 1 this week
The Creality K1 (2023, €599) and the QIDI Tech Q2 (2025, €499) are two FDM 3D printers many people compare before buying.
The QIDI Tech Q2 is the more affordable of the two, with a gap of about 100 (~17%) versus the other.
On the technical side, only the QIDI Tech Q2 supports multicolor (AMS), and the QIDI Tech Q2 offers more build volume (270×270×256 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Creality K1 €599 | QIDI Tech Q2 €499 | |
|---|---|---|
| Geometry | ||
| Build volume | 220×220×250 mm | 270×270×256 mm 🏆 |
| Weight | 12.5 kg | 18.1 kg |
| Speed | ||
| Max speed | 600 mm/s | 600 mm/s |
| Max acceleration | 20,000 mm/s² | 20,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 300 °C | 370 °C 🏆 |
| Nozzle material | brass | Bimetal hardened steel |
| Drive type | direct | direct |
| Flow rate | 32 mm³/s 🏆 | — |
| Bed | ||
| Max bed temp | 100 °C | 120 °C 🏆 |
| Bed material | PEI plate | Dual-sided textured PEI |
| Auto-leveling | auto mesh + strain gauge | Automatic (load cell sensor integrated into hotend) |
| Enclosed | Yes | Yes |
| Heated chamber | No | Yes 🏆 |
| Multimaterial | ||
| AMS compatible | No | Yes 🏆 |
| AMS type | — | — |
| AMS slots | — | 4 🏆 |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | Yes | — |
| Camera | — | Yes () |
| Calibration | ||
| Vibration compensation | Yes | — |
| Flow calibration | Yes | — |
| Input shaping | Yes | — |
| Pressure advance | Yes | — |
| Software | ||
| Official slicer | Creality Print | QIDI Studio |
| OrcaSlicer | Yes | — |
| Noise | ||
| Noise | — | — |
| Power | 350 W | 350 W |
Verdict
- On price, QIDI Tech Q2 is cheaper.
Frequently asked
- Which has better value: Creality K1 or QIDI Tech Q2?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- QIDI Tech Q2 with 270×270×256 mm.