Creality Hi Combo vs Flashforge Adventurer 5M Pro
👁 This comparison has been viewed 3 times · 2 this month · 2 this week
The Creality Hi Combo (2025, €599) and the Flashforge Adventurer 5M Pro (2023, €449) are two FDM 3D printers many people compare before buying.
The Flashforge Adventurer 5M Pro is the more affordable of the two, with a gap of about 150 (~25%) versus the other.
On the technical side, only the Flashforge Adventurer 5M Pro is enclosed (better for ABS and technical materials), and only the Creality Hi Combo supports multicolor (AMS).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Creality Hi Combo €599 | Flashforge Adventurer 5M Pro €449 | |
|---|---|---|
| Geometry | ||
| Build volume | 260×260×300 mm 🏆 | 220³ mm |
| Weight | 11.5 kg | 20.1 kg |
| Speed | ||
| Max speed | 500 mm/s | 600 mm/s 🏆 |
| Max acceleration | 12,000 mm/s² | 20,000 mm/s² 🏆 |
| Hot-end | ||
| Max nozzle temp | 300 °C 🏆 | 280 °C |
| Nozzle material | hardened steel | brass |
| Drive type | direct | direct |
| Flow rate | 32 mm³/s | 32 mm³/s |
| Bed | ||
| Max bed temp | 100 °C | 110 °C 🏆 |
| Bed material | PC spring steel | PEI plate (dual-sided) |
| Auto-leveling | auto mesh + strain gauge | auto mesh one-click |
| Enclosed | No | Yes 🏆 |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | Yes 🏆 | No |
| AMS type | CFS | — |
| AMS slots | 4 🏆 | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | Yes | Yes |
| Camera | — | Yes (1080p) |
| Calibration | ||
| Vibration compensation | Yes | Yes |
| Flow calibration | Yes | No |
| Input shaping | Yes | Yes |
| Pressure advance | Yes | Yes |
| Software | ||
| Official slicer | Creality Print | FlashPrint / Orca-Flashforge |
| OrcaSlicer | Yes | Yes |
| Noise | ||
| Noise | 48 dB 🏆 | — |
| Power | 350 W | 350 W |
Verdict
- If speed matters most, the Flashforge Adventurer 5M Pro wins.
- On price, Flashforge Adventurer 5M Pro is cheaper.
Frequently asked
- Which has better value: Creality Hi Combo or Flashforge Adventurer 5M Pro?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Creality Hi Combo with 260×260×300 mm.