Anycubic Kobra 2 Pro vs Artillery Sidewinder X4 Plus
👁 This comparison has been viewed 1 times · 0 this month · 0 this week
The Anycubic Kobra 2 Pro (2023, €369) and the Artillery Sidewinder X4 Plus (2024, €335) are two FDM 3D printers many people compare before buying.
The Artillery Sidewinder X4 Plus is the more affordable of the two, with a gap of about 34 (~9%) versus the other.
On the technical side, the Artillery Sidewinder X4 Plus offers more build volume (300×300×400 mm).
Below is the full spec table with the best value of each feature highlighted, plus a verdict by use case.
← Swipe to see more →
| Anycubic Kobra 2 Pro €369 | Artillery Sidewinder X4 Plus €335 | |
|---|---|---|
| Geometry | ||
| Build volume | 220×220×250 mm | 300×300×400 mm 🏆 |
| Weight | 8.5 kg | — |
| Speed | ||
| Max speed | 500 mm/s | 500 mm/s |
| Max acceleration | 20,000 mm/s² 🏆 | 12,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 260 °C | 300 °C 🏆 |
| Nozzle material | brass | — |
| Drive type | direct | direct |
| Flow rate | 25 mm³/s 🏆 | — |
| Bed | ||
| Max bed temp | 110 °C 🏆 | 100 °C |
| Bed material | PEI plate | PEI |
| Auto-leveling | LeviQ 2.0 | automatic 121-point |
| Enclosed | No | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | No | No |
| AMS type | — | — |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | No | — |
| Camera | — | — |
| Calibration | ||
| Vibration compensation | Yes | — |
| Flow calibration | No | — |
| Input shaping | Yes | — |
| Pressure advance | Yes | — |
| Software | ||
| Official slicer | Anycubic Slicer Next | OrcaSlicer / Cura / Artillery Slicer |
| OrcaSlicer | Yes | — |
| Noise | ||
| Noise | — | — |
| Power | 350 W 🏆 | 450 W |
Verdict
- On price, Artillery Sidewinder X4 Plus is cheaper.
Frequently asked
- Which has better value: Anycubic Kobra 2 Pro or Artillery Sidewinder X4 Plus?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Artillery Sidewinder X4 Plus with 300×300×400 mm.