Creality Ender 5 S1 vs QIDI Tech Plus4
Full 2026 comparison: side-by-side specs and data-driven verdict.
← Swipe to see more →
| Specifications | Creality Ender 5 S1 €559 | QIDI Tech Plus4 €799 |
|---|---|---|
| Geometry | ||
| Build volume | 220×220×280 mm | 305×305×280 mm 🏆 |
| Weight | 12.6 kg | 16 kg |
| Speed | ||
| Max speed | 250 mm/s | 600 mm/s 🏆 |
| Max acceleration | 5,000 mm/s² | 20,000 mm/s² 🏆 |
| Hot-end | ||
| Max nozzle temp | 300 °C | 370 °C 🏆 |
| Nozzle material | brass | hardened steel |
| Drive type | direct | direct |
| Flow rate | — | 50 mm³/s 🏆 |
| Bed | ||
| Max bed temp | 110 °C | 120 °C 🏆 |
| Bed material | PC spring steel | PEI plate |
| Auto-leveling | CR Touch | auto mesh + strain gauge |
| Enclosed | No | Yes 🏆 |
| Heated chamber | No | Yes 🏆 |
| Multimaterial | ||
| AMS compatible | No | No |
| AMS type | — | — |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | No | Yes |
| Ethernet | No | Yes |
| Camera | — | Yes (1080p) |
| Calibration | ||
| Vibration compensation | No | Yes |
| Flow calibration | No | Yes |
| Input shaping | No | Yes |
| Pressure advance | No | Yes |
| Software | ||
| Official slicer | Creality Print | Qidi Studio (OrcaSlicer fork) |
| OrcaSlicer | Yes | Yes |
| Noise | ||
| Noise | — | — |
| Power | 350 W 🏆 | 1000 W |
Verdict
- If speed matters most, the QIDI Tech Plus4 wins.
- On price, Creality Ender 5 S1 is cheaper.
Frequently asked
- Which has better value: Creality Ender 5 S1 or QIDI Tech Plus4?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- QIDI Tech Plus4 with 305×305×280 mm.