Bambu Lab P1S vs Creality Hi Combo
Full 2026 comparison: side-by-side specs and data-driven verdict.
← Swipe to see more →
| Specifications | Bambu Lab P1S €699 | Creality Hi Combo €599 |
|---|---|---|
| Geometry | ||
| Build volume | 256³ mm | 260×260×300 mm 🏆 |
| Weight | 12.95 kg | 11.5 kg |
| Speed | ||
| Max speed | 500 mm/s | 500 mm/s |
| Max acceleration | 20,000 mm/s² 🏆 | 12,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 300 °C | 300 °C |
| Nozzle material | stainless steel | hardened steel |
| Drive type | direct | direct |
| Flow rate | 32 mm³/s | 32 mm³/s |
| Bed | ||
| Max bed temp | 100 °C | 100 °C |
| Bed material | Dual-Sided Textured PEI Plate | PC spring steel |
| Auto-leveling | auto mesh | auto mesh + strain gauge |
| Enclosed | Yes 🏆 | No |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | Yes | Yes |
| AMS type | standard | CFS |
| AMS slots | 4 | 4 |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | No | Yes |
| Camera | Yes (720p) | — |
| Calibration | ||
| Vibration compensation | Yes | Yes |
| Flow calibration | No | Yes |
| Input shaping | Yes | Yes |
| Pressure advance | Yes | Yes |
| Software | ||
| Official slicer | Bambu Studio | Creality Print |
| OrcaSlicer | Yes | Yes |
| Noise | ||
| Noise | 50 dB | 48 dB 🏆 |
| Power | 1000 W | 350 W 🏆 |
Verdict
- On price, Creality Hi Combo is cheaper.
Frequently asked
- Which has better value: Bambu Lab P1S or Creality Hi Combo?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Creality Hi Combo with 260×260×300 mm.