Bambu Lab A2L vs Sovol Zero
Full 2026 comparison: side-by-side specs and data-driven verdict.
← Swipe to see more →
| Specifications | Bambu Lab A2L €379 | Sovol Zero €599 |
|---|---|---|
| Geometry | ||
| Build volume | 330×320×325 mm 🏆 | 152³ mm |
| Weight | 12.8 kg | 12 kg |
| Speed | ||
| Max speed | 500 mm/s | 1200 mm/s 🏆 |
| Max acceleration | 10,000 mm/s² | 40,000 mm/s² 🏆 |
| Hot-end | ||
| Max nozzle temp | 300 °C | 350 °C 🏆 |
| Nozzle material | stainless steel | hardened steel |
| Drive type | direct | direct |
| Flow rate | — | 35 mm³/s 🏆 |
| Bed | ||
| Max bed temp | 80 °C | 120 °C 🏆 |
| Bed material | Textured PEI plate | PEI plate |
| Auto-leveling | hands-free auto + offset | eddy current + load cell |
| Enclosed | No | Yes 🏆 |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | Yes 🏆 | No |
| AMS type | lite | — |
| AMS slots | 4 🏆 | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | No | Yes |
| Camera | Yes (1080p) | Yes (1080p) |
| Calibration | ||
| Vibration compensation | Yes | Yes |
| Flow calibration | Yes | Yes |
| Input shaping | Yes | Yes |
| Pressure advance | Yes | Yes |
| Software | ||
| Official slicer | Bambu Studio | OrcaSlicer (Sovol fork) |
| OrcaSlicer | Yes | Yes |
| Noise | ||
| Noise | 52 dB 🏆 | — |
| Power | — | 350 W 🏆 |
Verdict
- If speed matters most, the Sovol Zero wins.
- On price, Bambu Lab A2L is cheaper.
Frequently asked
- Which has better value: Bambu Lab A2L or Sovol Zero?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Bambu Lab A2L with 330×320×325 mm.