Anycubic Kobra 2 Pro vs Creality K1C
Full 2026 comparison: side-by-side specs and data-driven verdict.
← Swipe to see more →
| Specifications | Anycubic Kobra 2 Pro €369 | Creality K1C €559 |
|---|---|---|
| Geometry | ||
| Build volume | 220×220×250 mm | 220×220×250 mm |
| Weight | 8.5 kg | 12.5 kg |
| Speed | ||
| Max speed | 500 mm/s | 600 mm/s 🏆 |
| Max acceleration | 20,000 mm/s² | 20,000 mm/s² |
| Hot-end | ||
| Max nozzle temp | 260 °C | 300 °C 🏆 |
| Nozzle material | brass | hardened steel |
| Drive type | direct | direct |
| Flow rate | 25 mm³/s | 32 mm³/s 🏆 |
| Bed | ||
| Max bed temp | 110 °C 🏆 | 100 °C |
| Bed material | PEI plate | PEI plate |
| Auto-leveling | LeviQ 2.0 | auto mesh + strain gauge |
| Enclosed | No | Yes 🏆 |
| Heated chamber | No | No |
| Multimaterial | ||
| AMS compatible | No | No |
| AMS type | — | — |
| AMS slots | — | — |
| Connectivity | ||
| WiFi | Yes | Yes |
| Ethernet | No | Yes |
| Camera | — | Yes (1080p) |
| Calibration | ||
| Vibration compensation | Yes | Yes |
| Flow calibration | No | Yes |
| Input shaping | Yes | Yes |
| Pressure advance | Yes | Yes |
| Software | ||
| Official slicer | Anycubic Slicer Next | Creality Print |
| OrcaSlicer | Yes | Yes |
| Noise | ||
| Noise | — | — |
| Power | 350 W | 350 W |
Verdict
- If speed matters most, the Creality K1C wins.
- On price, Anycubic Kobra 2 Pro is cheaper.
Frequently asked
- Which has better value: Anycubic Kobra 2 Pro or Creality K1C?
- See the full spec table for the best decision based on your use case.
- Which has the larger build volume?
- Creality K1C with 220×220×250 mm.